Home > GLB Pool and Spa Products
Sort By:
Page of 1
Rendevous Protect Plus
Our Price: $9.99

1 pint bottle
A dual-purpose liquid concentrate that acts as a protection against staining and scale formation and as a clarifying agent to keep spa or hot tub water sparkling clear.
Rendevous Enhance
Our Price: $14.99

1 qt bottle
A clear solution of premixed liquid bromide salts that remain as a stable bank in the spa/hot tub water until ACTIVATE is added.
Rendevous Activate
Our Price: $15.99

2lb. bottle
Fast-dissolving, non-chlorine shock quickly destroys contaminants such as perspiration and cosmetics that cause odors and skin and eye irritation.
GLB Sequa-Sol Quart
Our Price: $16.99

SEQUA-SOL provides protection against scale, stains and rust caused by minerals in the water such as iron, copper, nickel, manganese, silicon and zinc. SEQUA-SOL is stable in water at high temperatures. This insures protection of all equipment and is especially effective on the heat exchange elements of swimming pool heaters.DIRECTIONS FOR USE:WHEN TO USESEQUA-SOL can be added to your pool water at any time during the swimming season. It is most important to add SEQUA-SOL when your pool is returned to normal operation in the beginning of the season or when your pool is initially filled.1. When a pool is initially filled, SEQUA-SOL should always be added because fresh water supplies usually contain stain and scale producing minerals such as iron, copper, manganese and calcium. For best results, add the required amount of SEQUA-SOL at the time you start to fill the pool, not after the pool filled. After SEQUA-SOL has been added and the pool filled, filter and circulate the water at least overnight before adding chlorine or other pool chemicals to allow SEQUA-SOL to react with and prevent precipitation of minerals in fresh water.2. When SEQUA-SOL is added to a pool that is already filled and in use, chlorine and other pool chemicals may be added immediately. SEQUA-SOL is completely compatible with chlorine and other pool chemicals.3. For the inital treatment, add 16 fl. oz. per 10,000 gallons of water of normal hardness and mineral content. If the water is extremely hard (over 200ppm) or has high iron, copper or manganese content (over 0.1 ppm) double the initial dosage. Use 32 fl. oz. per 10,000 gallons of water.4. For preventative maintenance, following the initial treatment, add 4 fl. oz. per 10,000 gallons of pool water once a week, to take care of make-up water.
Super Sequa-Sol 2lb.
Our Price: $19.99

SUPER SEQUA-SOL provides protection against scale, stains and rust caused by minerals in the water such as iron, copper, nickel, manganese, silicon and zinc. When a pool is initially filled SUPER SEQUA-SOL should be added because fresh water supplies usually contain small quantities of stain producing minerals such as iron, copper, or manganese. After SUPER SEQUA-SOL has been added and the pool filled, filter and circulate the water overnight before adding chlorine or other pool chemicals. This will allow SUPER SEQUA-SOL to react with and prevent precipitation of minerals in the fresh water. When SUPER SEQUA-SOL is added to a pool that is already filled and in use, chlorine and other pool chemicals may be added immediately.DIRECTIONS FOR USE:It is easier to prevent rust, corrosion and scaling problems than to cure them. An initial treatment of SUPER SEQUA-SOL is recommended when the pool is being filled and again at the start of each season.For pool water of normal hardness and mineral content: INITIAL TREATMENT: 10 oz. per 10,000 gallons of water.WEEKLY MAINTENANCE: 2 oz. per 10,000 gallons of water.For extremely hard water (over 200ppm), high iron, copper or manganese content(over 0.1ppm):INITIAL TREATMENT: 20 oz. per 10,000 gallons of water.WEEKLY MAINTENANCE: 2 oz. per 10,000 gallons of water.
GLB Oxy-Brite Non Chlorine Shock 5lb
Our Price: $39.99

ACTIVE INGREDIENT:Potassium peroxymonosulfate 41.3%INERT INGREDIENTS: 58.7% DIRECTIONS FOR USE:1. For the initial treatment, use OXY-BRITE?? at the rate of 1 Lb. per 10,000 gallons of pool water.2. Subsequent treatment for most residential pools with normal bathing loads should be made once every week at the rate of 1 Lb. per 10,000 gallons of pool water. More frequent treatment may be required in commercial or public pools with heavy bathing loads.OXY-BRITE contains no chlorine or other disinfectant and should be used for SHOCK TREATING ONLY. For routine disinfection of the pool water, use an EPA registered disinfectant according to its directions.HOW TO APPLYApply the required amount of OXY-BRITE into the pool water. Add the total amount at one time and concentrate the dosage mainly in the deep end of the pool.Application should be made when no swimmers are in the pool, preferable at night. Since OxY-BRITE contains no chlorine, there is no extended waiting period before swimming may be resumed.DANGERHarmful if swallowed. May irritate skin, eyes, nose and throat. Keep out of eyes and off skin. Avoid inhalation of dust.FIRST AIDIn case of contact, immediately flush skin or eyes for at least 15 minutes. For eyes, call a physician. If inhaled, remove to fresh air. If swallowed, DO NOT induce vomiting. Drink 1-2 glasses of water to dilute the stomach contents. Never give anything by mouth to an unconcious person. Call a physician.(NOTE TO PHYSICIAN: Insert gastric tube to prevent increased pressure that may result from rapid evolution of oxygen.)STORAGE AND DISPOSALStore this product in a cool, dry area away from direct sunlight and heat to avoid deterioration. In case of spill, flood areas with large quantities of water. Product or rinsates that cannot be used should be diluted with water before disposal in a sanitary sewer. Do not reuse empty container, but place in trash collection. Do not contaminate food or feed by storage, disposal or cleaning of equipment.PRECAUTIONARY STATEMENTSHAZARDS TO HUMANS AND DOMESTIC ANIMALSDANGER: corrosiveCauses skin and eye damage. May be fatal if swallowed. Do not get in eyes, on skin or on clothing. Wear goggles or face shield and rubber gloves when handling. Irritating to nose and throat. Avoid breathing dust. Remove and wash contaminated clothing before reuse.Mix only with water, using clean, dry utensils. Do not add this product to any dispensing device containing remnants of any other product. Such use of contamination with moisture, organic matter or other chemicals, may cause a violent reaction leading to fire or liberation of hazardous gases. In case of contamination or decomposition, do not reseal container. If possible, isolate container in open air or well-ventilated area. Flood with large amounts of water.
Rendevous Activate
Our Price: $39.99

5lb. bottle
Fast-dissolving, non-chlorine shock quickly destroys contaminants such as perspiration and cosmetics that cause odors and skin and eye irritation.
Rendevous Enhance 1 Gal.
Our Price: $44.99

1 gallon bottle A clear solution of premixed liquid bromide salts that remain as a stable bank in the spa/hot tub water until ACTIVATE is added.